Pneumatic Grinders Series

 

For S100 AND s150
. It can be applied to reshapern the large size , middle size ,casting gate or rising head , to wear smooth the middle size machanics , moulds and weld lines .

. Use the finishing mop instead of the grinder to conduct polishing
. Use the wire wheel instead to conduct the derusting and to remove the original painting on the metallic surface

For SJ100-90°，SJ125-90°and SJ150-110°

 

.It can be applied to weld the front end bevel before welding and to reshape the face of weld after welding

. Dissection of sheet metal and small steel shape .
. It can be applied to the polishing , derusting and finishing at the surface of engraving .

 

S100	S150
SJ100-90°	SJ125-90°
SJ180-110°

 

 

Technological Parameter	Model
	S100	S150	SJ100-90°	SJ125-90°	SJ180-110°
Max. diameter	100mm	150mm	100mm	125mm	180mm
No-load speed	9000r/min	6000r/min	11000r/min	13000r/min	9000r/min
Working Pressure	0.63Mpa	0.63Mpa	0.63Mpa	0.63Mpa	0.63Mpa
Air Consumption	≦39.95L/s	≦39.95L/s	≦277L/s	≦30L/s	≦35L/s
Inside Diameter of Sunction Tube	16mm	16mm	13mm	13mm	13mm
Mainshaft power	≧0.73Kw	≧1.5Kw	≧0.4kw	≧0.65kw	≧0.75kw
Weight	4.2kg	6kg	1.2kg	2.4kg	2.6kg