Products

You are here: Home > Products > Electric hoist > Electric chain hoist > Method of using permanent magnetic lifter

Method of using permanent magnetic lifter

 

1, When we lift something, the lifting surface is clean, such as rust peel and convex should clean up. Lifting magnet center line center line had better with the workpiece, and then magnetic lifter placed on work plane, rotating the handle by a "-" to " +" position, direction of rotation to the limit pin. Check handle security oblique block is locked automatically, and then lifting.


2, When the workpiece is lifting, overloading is strictly forbidden, no body from below through the workpiece, hanging workpiece temperature and ambient temperature of not more than 80 degrees, no violent vibration and impact.


3, When lifting the cylindrical workpiece, should keep the B shaped groove and the workpiece angle for two line contact, so that it 's gravity is only rated lifting 30%-50%.


4, After complete the lifting, inwards understand handle button, is a handle on the security keys and security pin from the. The handle is composed of " + " to " - " on the direction of rotation limiting pin. The hoisting device in a closed state, receiving workpiece and Jack detachment.

Method of using permanent magnetic lifter

3.5 times safety factor

Model Rated lifting strength Cylindrical lifting strength Max.pull-off strength L W H R Operation temperature Nte weight
Kgf Kgf Kgf °C Kg
MSFPML-1 100 30 350 92 64 70 145 <80 3
MSFPML-3 300 100 1050 165 88 96 176 <80 10
MSFPML-5 500 150 1750 216 118 118 219 <80 20
MSFPML-6 600 200 2100 236 118 120 219 <80 24
MSFPML-10 1000 300 3500 264 168 168 285 <80 50
MSFPML-15 1500 500 5200 352 168 168 380 <80 70
MSFPML-20 2000 600 7000 378 226 216 462 <80 125
MSFPML-30 3000 1000 10500 453 290 265 567 <80 220
MSFPML-50 5000 1500 17500 647 290 265 707 <80 355
MSFPML-60 6000 2000 19200 713 290 266 707 <80 398

 

3 times safety factor

Model Rated lifting strength Cylindrical lifting strength Max.pull-off strength L W H R Operation temperature Nte weight
Kgf Kgf Kgf °C Kg
MSFPML-1 100 30 300 92 64 70 145 <80 3
MSFPML-2 200 60 600 114 72 86 145 <80 5
MSFPML-3 300 100 900 165 88 96 176 <80 10
MSFPML-5 500 150 1500 210 88 96 203 <80 12.5
MSFPML-6 600 200 1800 216 118 118 219 <80 20
MSFPML-10 1000 300 3000 264 148 138 266 <80 37
MSFPML-15 1500 500 4500 308 168 168 285 <80 62
MSFPML-20 2000 500 6000 397 168 168 380 <80 80
MSFPML-30 3000 1000 9000 443 226 216 512 <80 160
MSFPML-50 5000 1500 15000 582 290 265 627 <80 320
MSFPML-60 6000 2000 18000 713 290 265 707 <80 398

 

 

>> Related products

Electric trolley

LIFTKING electric trolleys can be supplied in many different designs and are used to support and mount hoisting equipment for fixed or travelling applications. They are tested with overload and supplied with a test certificate...

Geared trolley with chain

The Geared Trolley can be hung on the regular I-steel in various.it enables the exact positioning or easy traversing of large loads with either manual or powered hoisting equipment....

Plain trolley

LIFTKING manual trolleys can be supplied in many different designs and are used to support and mount hoisting equipment for fixed or travelling applications. They are tested with overload and supplied with a test certificate...